                       Sammler frames with BPQ node

   The BPQ is good program and very good for poor links, but not working with
Sammler frames (remember frames out time)
   It is possible with the AX3B driver. Now is for BPQ and modem Baycom  type
working only.
  Good for links between BPQ and Flexnet or TFPCX (-SR -SA) stations and sure
BPQ.
  For HF in first time, then 3 frames out time. But working good in V-UHF.

  IF used  AX3B.COM  then  the  driver  is  to 1200 bds and COM1 (3f8, irq4),
TXDelay  200 ms, TXTail  20 mS, Slottime  100 mS, persistance  64, sense data
transitions and int 0x60 to terminal program.
  Help with AX3B.COM -?

  On BPQCFG.TXT is good that:

        ..............
        PORT
                ID=ax3b
                TYPE=EXTERNAL
                PROTOCOL=KISS
                INTLEVEL=96
                SPEED=9600
                MAXFRAME=3
                TXDELAY=1
                SLOTTIME=100
                PERSIST=65
                FULLDUP=0
                FRACK=5500
                RESPTIME=100
                MHEARD=Y
                PORTCALL=XX1XXX
                PORTALIAS=XX1XXX-7
                ALIAS_IS_BBS=1
                MINQUAL=1
        ENDPORT
        ..............


   Please say me your work with this driver or possible bugs.
   For working with TNC or USCC is other driver.


   73 de Luis Manuel

   My address:
        INET e-mail:    ea1csb@qsl.net
        Radio e-mail:   ea1csb@ea1csb.eabu.esp.eu
