Channel scope

 Shows signal strengths (SG) of the channels of the selected bank.
 (Select bank on the channel data page). Scope does not show SG values of the lockout channels.
 
 X-Axis: channel number between 1 -50 (within selected bank).
 Y-Axis: SG values between 0 - 200.
 Save button/menu item saves channel scope data into the selected file.
 Mouse left click on the selected S-bar stops sweeping (if active) and tunes to the channel plus shows
 channel information on the status bar. Mouse right click on the channel scope area starts sweeping.
 
 Relation between SG and S-meter bar values
 0   - 55  = 0 bars
 56  - 60  = 1 bar
 61  - 80  = 2 bars
 81  - 95  = 3 bars
 96  - 125 = 4 bars
 126 - 140 = 5 bars
 > 140     = 6 bars
 (No apparent relation to when the squelch opens)
 
 MARKS
   Sets Y value marks ON/OFF.
 PEAK HOLD
   Holds greatest SG values of all channels or one selected channel.
 SWEEP
   SWEEP ON:  Scanner does not stop on active channels.
   SWEEP OFF: Scanner stops on active channel and continues scanning when squelch is closed.
 FAST
   When set to ON, provides a bit better scope performance. If CC780/channel scope hangs up, turn the setting OFF.
 STATUS
   When set to ON, scope channel number, memory bank channel number and frequency are shown
   on the statusbar when mouse is moved over S-bars.
 MULTICOLOR
   Sets multicolored bars ON/OFF.
 3D
   Sets scope 3D FX ON/OFF.
 AVG
   Sets average value indicator ON/OFF.
 MAX
   Sets maximum value indicator ON/OFF. 
 START
   Starts channel scope.
 STOP
   Stops channel scope.
 SAVE
   Saves channel scope as bitmap/enhanced metafile (chscope.bmp/wmf) into the current directory.
 PRINT
   Prints channel scope.
 PROP
   Sets proportional printing ON/OFF. 
Back to Help topics